Straights
Push to connect straight fittings are typically used to connect air line to bags and air struts. Female straights are the best way to convert a leader line to standard nylon air line while male straights are commonly threaded into the bags themselves. If you are unsure which push to connect straights to purchase for your setup, feel free to contact a LOADSUPPORT.COM air suspension specialist for recommendations.
Straights Products Browse a collection of Straights products en
<p>Tired of always looking for the right size open ended wrench or your adjustable keeps slipping off and marking up your fittings and tank? This aluminum fitting wrench is the perfect solution, especially if you're working on a show-worthy hardline setup. This wrench engages with 5 sides of the fitting for a more secure fit. It's also aluminum, meaning it's softer than the brass and steel fittings you're working with, and should reduce any marring to the fittings.</p>BR26507 USD 30.00 https://schema.org/NewCondition https://schema.org/InStock https://www.loadsupport.com/fittings/push-to-connect/straights/adjustable-fitting-wrench.html
Pace BSPT Male StraightPace BSPT Male Straight https://www.loadsupport.com/media/catalog/product/cache/c07d28ad5d149b06f4ee5222c20ececb/p/a/pace-bspt-male-straight-1_1_3.jpg$4.00In some applications, your bags or manifold could have BSPT threaded ports if they are from manufacturers such as D2 Racing, Truhart, Maxload, or FeelAir. In this case, using the Pace BSPT Male Straight fittings ensure a simple way to connect your air line to your setup with no headaches.Pace BSPT Male Straight USD 4.00 https://schema.org/NewCondition https://schema.org/InStock https://www.loadsupport.com/fittings/push-to-connect/straights/pace-bspt-male-straight.html
The SMC DOT Bulkhead Female Straights are great fittings to use when running air lines into a false floor or from the interior of your vehicle to the exterior. If you need the air line to make a direct 90º turn after the female bulkhead, just use a swivel elbow like the SMC DOT Swivel Elbow. These fittings are DOT approved and feature a metal sleeve which helps align the air line inside of the fitting, providing an improved seal.
For an easy install, check out our SMC DOT Bulkhead Drill Bit
Drill bit sizes for installation:- 1/4" bulkhead - 15mm or 9/16" drill bit
- 3/8" bulkhead - 23mm or 7/8" drill bit
- 1/2" bulkhead - 26mm or 1" drill bit
SMC DOT Female StraightSMC DOT Female Straight https://www.loadsupport.com/media/catalog/product/cache/c07d28ad5d149b06f4ee5222c20ececb/s/m/smc-dot-female-straight-1b.jpg The SMC DOT Female Straight is typically used to connect Leader Lines to standard air line. These fittings are DOT approved and feature a metal sleeve which helps align the air line inside of the fitting, providing an improved seal. SMC DOT Female Straight USD 4.63 https://schema.org/NewCondition https://schema.org/InStock https://www.loadsupport.com/fittings/push-to-connect/straights/smc-dot-female-straight.html$4.63
SMC DOT Male StraightSMC DOT Male Straight https://www.loadsupport.com/media/catalog/product/cache/c07d28ad5d149b06f4ee5222c20ececb/s/m/smc-dot-male-straight-1b.jpg The male straight from SMC is generally used to connect standard air line to bags and tanks when a 90º elbow is not necessary. It's DOT approved and features a metal sleeve which helps align the air line inside of the fitting, providing an improved seal. SMC DOT Male Straight USD 2.33 https://schema.org/NewCondition https://schema.org/InStock https://www.loadsupport.com/fittings/push-to-connect/straights/smc-dot-male-straight.html$2.33
The SMC DOT Straight Cartridge is a push to connect replacement unit. If the PTC ports on your Air Lift or AccuAir manifold happen to be leaking (and the air line going into them is cut at a perfect 90° angle), the o-ring inside of the port has most likely been damaged and will need to be replaced.
SMC DOT Straight Cartridge USD 3.25 https://schema.org/NewCondition https://schema.org/InStock https://www.loadsupport.com/fittings/push-to-connect/straights/smc-dot-straight-cartridge.html
SMC Female StraightSMC Female Straight https://www.loadsupport.com/media/catalog/product/cache/c07d28ad5d149b06f4ee5222c20ececb/s/m/smc_female_straight_base_3b.jpg This female straight from SMC can be used on the male threaded posts of certain gauges like the Exta Dual Needle Gauge. Used for 1/8" air line only. SMC Female Straight USD 4.22 https://schema.org/NewCondition https://schema.org/InStock https://www.loadsupport.com/fittings/push-to-connect/straights/smc-female-straight.html$4.22
SMC Male StraightSMC Male Straight https://www.loadsupport.com/media/catalog/product/cache/c07d28ad5d149b06f4ee5222c20ececb/s/m/smc_male_straight_base_3_1.jpg This male straight from SMC can be used to route 1/8" air line to your gauges. The 1/8"PTC - 1/4"NPT version of this fitting is generally used to run air line out of the gauge ports of an AccuAir VU4 Manifold. SMC Male Straight USD 2.02 https://schema.org/NewCondition https://schema.org/InStock https://www.loadsupport.com/fittings/push-to-connect/straights/smc-male-straight.html$2.02
SMC PTC Rubber BootSMC PTC Rubber Boot https://www.loadsupport.com/media/catalog/product/cache/c07d28ad5d149b06f4ee5222c20ececb/s/m/smc_rubber_grommet_01.jpg$1.50This rubber boot from SMC is used to protect your PTC fittings from grime and debris when mounted outside of your vehicle.
SMC PTC Rubber Boot USD 1.50 https://schema.org/NewCondition https://schema.org/InStock https://www.loadsupport.com/fittings/push-to-connect/straights/smc-ptc-rubber-boot.html
