<p>These Load Support helper bags from Torque Parts will bolt into your factory rear suspension and with a pressure range of 5 - 100 PSI, will allow up to 5,000 lbs. of load leveling capacity. This provides your truck the ability to stay level and stable, both when towing, or loaded up at max payload. This easy to install kit includes all brackets and pieces necessary to get your rear helper air springs installed. If your vehicle has been lowered, this kit will not work. If you have a lifted vehicle, you most likely will need spacer brackets to go with this kit, sold separately.</p> <strong>Includes:</strong> <ul> <li>(2) Air springs</li> <li>(2) Inflation valves</li> <li>(2) 1/4" PTC fittings</li> <li>Air line</li> <li>Mounting brackets</li> <li>Hardware</li> <li>Instruction manual</li> <li>3 year, unlimited mile warranty</li> <li>Free technical support</li> </ul>

<p>The Air Lift LoadLifter 5000 Rear Kit 57295 works with your existing rear suspension to allow up to 5,000 lbs. of load leveling capacity. These double bellow air springs are one of Air Lift's heaviest rated bags which increase safety and comfort when towing and hauling heavy loads. The Air Lift LoadLifter 5000 Rear Kit 57295 includes everything you need for installation and comes with a lifetime warranty.</p> <strong>Includes:</strong> <ul> <li>(2) Air springs</li> <li>(2) Inflation valves</li> <li>(2) 1/4" PTC fittings</li> <li>Air line</li> <li>Mounting brackets</li> <li>Hardware</li> <li>Instruction manual</li> <li>Lifetime warranty</li> <li>Free technical support</li> </ul> <br> <strong>Installation Manual:</strong> <ul> <li><a href="{{store direct_url="media/bagriders/tech_section/load_leveling/installation_manuals/air_lift/suspension/air_lift_loadlifter_5000_rear_kit_57295.pdf"}}" target="_blank"> Air Lift LoadLifter 5000 Rear Kit 57295 Installation Manual</a></li> </ul>

<p>The Air Lift LoadLifter 5000 Ultimate Rear Kit 88295 features air springs with exclusive internal jounce bumpers that work with your existing rear suspension to allow up to 5,000 lbs. of load leveling capacity. The internal jounce bumpers are made out of closed-cell urethane foam and provide a cushion of air that eliminate harsh jarring on rough roads and can be safely run with zero air pressure. The Air Lift LoadLifter 5000 Ultimate Rear Kit 88295 is one of Air Lift's heaviest rated kits and comes with a lifetime warranty.</p> <strong>Includes:</strong> <ul> <li>(2) Air springs with internal jounce bumpers</li> <li>(2) Inflation valves</li> <li>(2) 1/4" PTC fittings</li> <li>Air line</li> <li>Mounting brackets</li> <li>Hardware</li> <li>Instruction manual</li> <li>Lifetime warranty</li> <li>Free technical support</li> </ul> <br/> <strong>Installation Manual:</strong> <ul> <li><a href="{{store direct_url="media/bagriders/tech_section/load_leveling/installation_manuals/air_lift/suspension/air_lift_loadlifter_5000_ultimate_rear_kit_88295.pdf"}}" target="_blank"> Air Lift LoadLifter 5000 Ultimate Rear Kit 88295 Installation Manual</a></li> </ul>

<p>The Air Lift LoadLifter 7500 XL Rear Kit 57595 features massive 7 inch double bellow air springs that generate greater leveling strength at lower pressures. The LoadLifter 7500 XL is designed to support the largest loads on the road by offering up to 7,500 lbs. of load leveling capacity. The Air Lift LoadLifter 7500 XL Rear Kit 57595 is compatible with most 5th wheel and gooseneck hitches and uses the existing holes in your vehicle's frame for a bolt on installation without any drilling.</p> <strong>Includes:</strong> <ul> <li>(2) Air springs</li> <li>(2) Inflation valves</li> <li>(2) 1/4" PTC fittings</li> <li>Air line</li> <li>Mounting brackets</li> <li>Hardware</li> <li>Instruction manual</li> <li>Lifetime warranty</li> <li>Free technical support</li> </ul> <br> <strong>Installation Manual:</strong> <ul> <li><a href="{{store direct_url="media/bagriders/tech_section/load_leveling/installation_manuals/air_lift/suspension/air_lift_loadlifter_7500_xl_rear_kit_57595.pdf"}}" target="_blank"> Air Lift LoadLifter 7500 XL Rear Kit 57595 Installation Manual</a></li> </ul>

<p>Offering easy and convenient air pressure adjustment for any brand of aftermarket air spring, the WirelessOne on-board air compressor system from Air Lift is ideal for any air spring user. With the included handheld controller and NEW wireless app, inflation and deflation has never been more simple. With air spring equipped vehicles, adjusting the air pressure has been an inconvenience -- find a gas station with an air compressor, then fiddle with Schrader valves until the pressures are equalized. Air Lift looked to eliminate that hassle with WirelessOne, making every part of the process simple and fast, starting with installation. WirelessONE is a single path system, meaning that both air springs will inflate or deflate to the same pressure. The air springs are inflated and deflated by an external air compressor with either one or two Schrader valves, attached to one or two air springs. Between the included wiring harness, installation hardware and a fully illustrated instruction manual, WirelessOne will be up and running in no time. Installing the system takes only an hour, with no air line or wiring needing to be routed through the cab of the vehicle, as well as no need to tap into the ignition wire. By eliminating this necessity, Air Lift removed the need to drill into the firewall and the need to work with live wires. When installed, the system allows you to quickly and easily adjust the air pressure in the air springs to accommodate changes in the vehicle's load. With the second generation of WirelessOne , Air Lift created a mobile app for both iOS and Android devices, on top of the included wireless controller, allowing you to connect with the Bluetooth -enabled manifold easily. As the leader in air suspension products for over 65 years, Air Lift is committed to delivering quality parts that last. To ensure the highest quality, longevity, and customer satisfaction, the system comes with a two-year warranty and a 60-day, no-questions-asked, </p> <strong>Features</strong> <ul> <li>Works with all brands of air springs</li> <li>Operates within 5-100 PSI</li> <li>Compact, weather-resistant and corrosion-proof, relay integrated, single path manifold</li> <li>Includes instruction manual for an easy installation in one hour or less</li> <li>Free iOS and Android mobile app easily connects with the Bluetooth -enabled manifold</li> <li>Manifold and controller software updates provided over the air via free mobile app</li> <li>Two-year limited warranty and 60 day, no questions asked, money-back guarantee</li> <li>Compact, wireless handheld controller with LCD display, programmable with up to three user-defined presets</li> </ul> <br> <strong>Includes</strong> <ul> <li>Wireless remote</li> <li>Manifold</li> <li>Air compressor</li> <li>Wire harness</li> <li>Fittings</li> <li>Hardware</li> <li>Instruction manual</li> </ul>

<p>Air Lift's WirelessOne 2nd Generation system keeps the same format as the original with a slightly updated, but recognizable controller. You can choose between the standard DIY system (25980) with a light duty compressor, or you can choose the EZ mount version (25980EZ) which comes pre-assembled and leak-tested from Air Lift, includes a higher rated compressor, and is ready to install out of the box. This single path version will fill both of your bags equally. If you carry offset loads, check out Air Lift's <a href="{{store direct_url=air-lift-wirelessair-dual-path-compressor-system.html}}" target="_blank">WirelessAir</a> system for individual left & right control.</p>

<p>The second generation of WirelessAir has arrived from Air Lift featuring a new updated controller while retaining dual path valving for individual left and right control. It's available from Air Lift as an EZ mount version with (74000EZ) or without(73000EZ) a physical controller that is pre-assembled and leak-tested that makes install as simple as possible, or as a DIY kit with a controller (74000) for those who may want to lay things out on the frame their own way. Pair it with any brand of load support helper air springs for a complete set up. If you tend to tow more than haul payloads, or always haul evenly distributed payloads, the single path <a href="{{store direct_url=air-lift-wirelessone-single-path-compressor-system.html}}" target="_blank">WirelessOne</a> compressor system maybe more suitable for you.</p>

<p>With the new WirelessOne EZ Mount compressor and manifold unit from Air Lift, installing an onboard air compressor system has never been easier. This system, which features the new and improved WirelessONE system, packages the components of the compressor system into one easy-to-install package. The manifold and air compressor are pre-assembled at the factory in a black, powder-coated steel mounting plate. This plate helps to protect the vehicle by requiring no frame drilling. The system easily attaches to the vehicle frame rail through the use of a removable U-bolt, making the entire on-board air compressor system a no-drill application. Without EZ Mount, the manifold and compressor must be mounted to the frame of the vehicle individually and then routed together. This process leaves room for error and frustration. By securing the components together, Air Lift is able to factory-test and ensure that they system will be free from leaks, as well as provide a much simpler installation process. Buying a compressor system with EZ Mount helps to greatly reduces installation time -- by up to one hour -- and comes with a fully illustrated and easy to understand installation manual. Backed by Air Lift's industry-exclusive two-year limited warranty and 60-day, no-questions-asked, money-back guarantee, it's a system you know you can trust. As the leader in air suspension products for more than 65 years, Air Lift is committed to delivering quality load support parts that last. Take your load support solution to the next level today with EZ Mount! </p> <strong>Features</strong> <ul> <li>Pre-assembled at the factory with manifold and air compressor to a black powder-coated steel mounting plate</li> <li>Includes a removable U-bolt for an easy and drill-free attachment to the frame rail</li> <li>Works with all brands of air springs</li> <li>Operates within 5-100 PSI</li> <li>Compact, weather-resistant and corrosion-proof, relay integrated, single path manifold</li> <li>Includes instruction manual for an easy installation in one hour or less</li> <li>Free iOS and Android mobile app easily connects with the Bluetooth -enabled manifold</li> <li>Manifold and controller software updates provided over the air via free mobile app</li> <li>Two-year limited warranty and 60 day, no questions asked, money-back guarantee</li> <li>Compact, wireless handheld controller with LCD display, programmable with up to three user-defined presets</li> </ul> <br> <strong>Includes</strong> <ul> <li>Wireless remote</li> <li>Manifold</li> <li>Air compressor</li> <li>Frame mount</li> <li>Wire harness</li> <li>Fittings</li> <li>Hardware</li> <li>Instruction manual</li> </ul>

<p>AirIQ delivers the ultimate control for your load leveling air suspension and helper bags. Complete air management packages are factory assembled and tested for guaranteed performance. This kit is our most affordable AirIQ solution with a Standard Duty compressor and single channel valving for control of both air springs together.</p> <strong>Kit Includes:</strong> <ul> <li>1-Channel AirIQ Bluetooth Management System for parallel control of two air springs from the AirIQ App</li> <li>LOGIQ 25% duty cycle, 150 psi compressor with 2.03 CFM @ 0 psi</li> <li>Plumbing kit and wiring</li> <li>Easy-to-use frame mounting brackets</li> </ul>

<p>AirIQ delivers the ultimate control for your load leveling air suspension and helper bags. Complete air management packages are factory assembled and tested for guaranteed performance. This kit is upgraded to independent corner control with dual channel valving to manage offset loads with ease.</p> <strong>Kit Includes:</strong> <ul> <li>2-Channel AirIQ Bluetooth Management System for individual control of two air springs from the AirIQ App</li> <li>LOGIQ 25% duty cycle, 150 psi compressor with 2.03 CFM @ 0 psi</li> <li>Plumbing kit and wiring</li> <li>Easy-to-use frame mounting brackets</li> </ul>

<p>AirIQ delivers the ultimate control for your load leveling air suspension and helper bags. Complete air management packages are factory assembled and tested for guaranteed performance. This kit is upgraded with a Heavy Duty compressor and dual channel valving for ultimate performance.</p> <strong>Kit Includes:</strong> <ul> <li>2-Channel AirIQ Bluetooth Management System for individual control of two air springs from the AirIQ App</li> <li>LOGIQ 33% duty cycle, 150 psi compressor with 2.62 CFM @ 0 psi</li> <li>Plumbing kit and wiring</li> <li>Easy-to-use frame mounting brackets</li> </ul>

<p>The Air Shock Single Path Compressor System 25804 from Air Lift is designed to work with many different brands of air shocks and features a simple single needle analog gauge with inflate and deflate switches. The easy to mount bracket system allows you to install the controller wherever you see fit. This simple system allows you to quickly adjust your vehicle's air springs from the driver's seat which is convenient for changes in load or road conditions while on the move. The included standard duty compressor means no more searching for gas stations to fill up your air shocks to the desired pressure when leveling out your load.</p> <p>The Air Shock management system provides a single path of airflow to your vehicle's air shocks. This meant that your left and right air shocks inflate and deflate equally to the same pressure.</p> <p>You can install the Air Shock Single Path Management Package 25804 in a few hours with the help of an easy to follow installation manual. The standard duty compressor mounts easily to your vehicle's frame and attaches to an air line that runs to your air shocks. The controller can be mounted in the cabin of your vehicle, typically in or under the dash in a location that won't be accidentally bumped.</p> <strong>Features:</strong> <ul> <li>Easy to use controller / gauge with mounting bracket</li> <li>Adjust the vehicle's air shocks while on the move from the driver's seat</li> <li>Single path control: left and right air springs are inflated / deflated equally</li> <li>Quick and easy installation</li> <li>2 year warranty</li> </ul> <br> <strong>Includes:</strong> <ul> <li>Air Shock single needle analog gauge and switches with mounting bracket</li> <li>Standard duty air compressor</li> <li>Wire harness</li> <li>Fittings</li> <li>Hardware</li> <li>Instruction manual</li> </ul>

<p>The LoadController II Single Path Compressor System [25592] from Air Lift features a simple single needle analog gauge with inflate and deflate switches, combined in an easy to mount bracket system. This simple system allows you to quickly adjust your vehicle's air springs from the driver's seat which is convenient for changes in load or road conditions while on the move. The included standard duty compressor means no more searching for gas stations to fill up your air springs to the desired pressure when leveling out your load. As an added safety measure, the LoadController II Single Path system automatically senses low air spring pressure and immediately activates to maintain a safe pressure level.</p> <p>This LoadController II system provides a single path of airflow to your vehicle's air springs. This means that your left and right air springs inflate and deflate equally to the same pressure. For independent control of your left and right air springs, be sure to check out any of our "Dual Path" systems.</p> <p>You can install the LoadController II Single Path Compressor System [25592] in a few hours with the help of an easy to follow installation manual. The standard duty compressor mounts easily to your vehicle's frame and attaches to an air line that runs to your air springs. The controller can be mounted in the cabin of your vehicle, typically in or under the dash in a location that won't be accidentally bumped.</p> <strong>Features:</strong> <ul> <li>Easy to use controller / gauge with mounting bracket</li> <li>Adjust the vehicle's air springs while on the move from the driver's seat</li> <li>Single path control: left and right air springs are inflated / deflated equally</li> <li>Low pressure sensor automatically activates to maintain safe pressure level</li> <li>Quick and easy installation</li> <li>2 year warranty</li> </ul> <br> <strong>Includes:</strong> <ul> <li>LoadController II single needle analog gauge and switches with mounting bracket</li> <li>Standard duty air compressor</li> <li>Low pressure sensor</li> <li>Wire harness</li> <li>Fittings</li> <li>Hardware</li> <li>Instruction manual</li> </ul>

<p>The LoadController Single Path Compressor System [25854] from Air Lift features a user friendly, single needle analog gauge with inflate and deflate buttons to let you quickly adjust your vehicle's air springs from the driver's seat. This is extremely convenient for changes in load or road conditions and the included heavy duty compressor means no more searching for gas stations to fill up your air springs to the desired pressure when leveling out your load. Air Lift's heavy duty compressor is best for frequent users of the system, and it inflates faster and more quietly than their standard compressor. As an added safety measure, the LoadController Single Path system automatically senses low air spring pressure and immediately activates to maintain a safe pressure level.</p> <p>This LoadController system provides a single path of airflow to your vehicle's air springs. This means that your left and right air springs inflate and deflate equally to the same pressure. For independent control of your left and right air springs, be sure to check out the <a href="{{store direct_url="air-lift-loadcontroller-dual-path-compressor-system-heavy-duty-25856.html"}}" target="-blank">Air Lift LoadController Dual Path Compressor System (Heavy Duty) [25856]</a>.</p> <p>You can install the LoadController Single Path Compressor System [25854] in a few hours with the help of a fully illustrated easy to follow installation manual. The heavy duty compressor mounts easily to your vehicle's frame and attaches to an air line that runs to your air springs. The gauge can be mounted in the included mounting cup, flush mounted into your dash, or inserted into any 2 1/8 inch gauge pod inside the cabin of your vehicle.</p> <strong>Features:</strong> <ul> <li>Easy to use controller / gauge</li> <li>Adjust vehicle's air springs while on the move from the driver's seat</li> <li>Single path control: right and left air springs are inflated / deflated equally</li> <li>Low pressure sensor automatically activates to maintain safe pressure level</li> <li>Quick and easy installation</li> <li>2 year warranty</li> </ul> <br> <strong>Includes:</strong> <ul> <li>LoadController single needle analog gauge with easy to use inflate and deflate buttons</li> <li>Heavy duty air compressor (faster and quieter than the standard compressor)</li> <li>Low pressure sensor</li> <li>Wire harness</li> <li>Fittings</li> <li>Hardware</li> <li>Instruction manual</li> </ul>

<p>The LoadController Dual Path Compressor System [25852] from Air Lift features a user friendly, dual needle analog gauge with inflate and deflate buttons to let you quickly adjust your vehicle's air springs from the driver's seat. This is extremely convenient for changes in load or road conditions and the included standard duty compressor means no more searching for gas stations to fill up your air springs to the desired pressure when leveling out your load. As an added safety measure, the LoadController Single Path system automatically senses low air spring pressure and immediately activates to maintain a safe pressure level.</p> <p>This LoadController system provides a dual path of airflow to your vehicle's air springs. This means that your left and right air springs can be set to independent pressures. This is helpful if you have more weight on one side of the vehicle than the other. The dual path also prevents air from transferring between air springs, allowing for more stable cornering and less body roll.</p> <p>You can install the LoadController Dual Path Compressor System (Standard Duty) [25852] in a few hours with the help of a fully illustrated easy to follow installation manual. The standard duty compressor mounts easily to your vehicle's frame and attaches to an air line that runs to your air springs. The gauge can be mounted in the included mounting cup, flush mounted into your dash, or inserted into any 2 1/8 inch gauge pod inside the cabin of your vehicle.</p> <strong>Features:</strong> <ul> <li>Easy to use controller / gauge</li> <li>Adjust vehicle's air springs while on the move from the driver's seat</li> <li>Dual path control: right and left air springs are inflated / deflated independently, which is ideal for uneven loads</li> <li>Low pressure sensor automatically activates to maintain safe pressure level</li> <li>Quick and easy installation</li> <li>2 year warranty</li> </ul> <br> <strong>Includes:</strong> <ul> <li>LoadController dual needle analog gauge with easy to use inflate and deflate buttons</li> <li>Standard duty air compressor</li> <li>Wire harness</li> <li>Fittings</li> <li>Hardware</li> <li>Instruction manual</li> </ul>

<p>The LoadController Dual Path Compressor System [25856] from Air Lift features a user friendly, dual needle analog gauge with inflate and deflate buttons to let you quickly adjust your vehicle's air springs from the driver's seat. This is extremely convenient for changes in load or road conditions and the included heavy duty compressor means no more searching for gas stations to fill up your air springs to the desired pressure when leveling out your load. As an added safety measure, the LoadController Dual Path system automatically senses low air spring pressure and immediately activates to maintain a safe pressure level.</p> <p>This LoadController system provides a dual path of airflow to your vehicle's air springs. This means that your left and right air springs can be set to independent pressures. This is helpful if you have more weight on one side of the vehicle than the other. The dual path also prevents air from transferring between air springs, allowing for more stable cornering and less body roll. For equal control of your left and right air springs, be sure to check out the <a href="{{store direct_url="air-lift-loadcontroller-single-path-compressor-system-heavy-duty-25854.html"}}" target="_blank">Air Lift LoadController Single Path Compressor System (Heavy Duty) [25854]</a>.</p> <p>You can install the LoadController Dual Path Compressor System (Heavy Duty) [25856] in a few hours with the help of a fully illustrated easy to follow installation manual. The standard duty compressor mounts easily to your vehicle's frame and attaches to an air line that runs to your air springs. The gauge can be mounted in the included mounting cup, flush mounted into your dash, or inserted into any 2 1/8 inch gauge pod inside the cabin of your vehicle.</p> <strong>Features:</strong> <ul> <li>Easy to use controller / gauge</li> <li>Adjust vehicle's air springs while on the move from the driver's seat</li> <li>Dual path control: right and left air springs are inflated / deflated independently, which is ideal for uneven loads</li> <li>Low pressure sensor automatically activates to maintain safe pressure level</li> <li>Quick and easy installation</li> <li>2 year warranty</li> </ul> <br> <strong>Includes:</strong> <ul> <li>LoadController dual needle analog gauge with easy to use inflate and deflate buttons</li> <li>Heavy duty air compressor(faster and quieter than the standard compressor)</li> <li>Wire harness</li> <li>Fittings</li> <li>Hardware</li> <li>Instruction manual</li> </ul>